How to Fix Valorant VAN 1067 Without Reinstalling

Learn how to fix Valorant VAN 1067 error on Windows 10 without reinstalling. Enable TPM 2.0, Secure Boot, and apply simple solutions to resolve the issue.

If you are experiencing the VAN 1067 error in Valorant on Windows 10, you’re not alone. This error can be particularly frustrating, especially when you’ve already tried reinstalling both the game and Riot Vanguard. The good news is that you don’t need to reinstall Valorant.

In this comprehensive guide, we’ll show you how to fix the VAN 1067 error without reinstalling, focusing on enabling TPM 2.0 and Secure Boot in BIOS, which are the most common causes of this error.

What Causes VAN 1067 Error in Windows 10?

The VAN 1067 error typically occurs when TPM 2.0 (Trusted Platform Module) or Secure Boot is disabled on your computer. These are security features that Valorant’s anti-cheat software, Vanguard, requires to run the game. Vanguard enforces these settings to ensure that no low-level cheats or rootkits can manipulate your system during the boot process.

The error message usually says:

“This build of Vanguard requires TPM version 2.0 and Secure Boot to be enabled in order to play.”

While this might seem like a bug, it’s actually a part of Riot Games’ security protocols to prevent cheating.

TPM 2.0 Required for Valorant

Starting in mid-2022, Valorant began enforcing TPM 2.0 as a requirement for the game. This is a feature present on most modern PCs and is a hardware-level security component that prevents malicious software from compromising your system.

TPM 2.0 is a security chip that stores cryptographic keys used for security functions such as encryption. Without TPM 2.0, Vanguard won’t allow you to run Valorant, as it assumes that your system is vulnerable to attack.

Riot Games added this requirement because TPM 2.0 helps prevent cheats and other malicious software from interacting with Valorant’s anti-cheat system.

How to Enable TPM 2.0 in BIOS for VAN 1067

To resolve the VAN 1067 error, you need to ensure that TPM 2.0 is enabled in your system BIOS. Here’s how you can do it:

Step 1: Check if TPM 2.0 is Installed

Press Windows + R, type tpm.msc, and hit Enter.
If you see “TPM is ready for use” with version 2.0, you’re good to go.
If it says that TPM is not found or not available, you’ll need to enable it in BIOS.

Step 2: Enable TPM in BIOS

Restart your computer.
Enter BIOS/UEFI by pressing the appropriate key during startup. Common keys include DEL, F2, or F10, depending on your motherboard.
Locate the TPM settings in BIOS:
- On Intel systems, it’s called “PTT” (Platform Trust Technology).
- On AMD systems, it’s called “fTPM” (Firmware TPM).
Set TPM to Enabled.
Save the changes and exit BIOS.

Now, TPM 2.0 should be active on your system.

Why Does Valorant Need Secure Boot?

Secure Boot is another essential security feature that prevents unauthorized software from loading during the boot process. Valorant’s anti-cheat system, Vanguard, relies on Secure Boot to make sure that only trusted and signed software runs when your PC starts. This ensures that no malicious software can interfere with Valorant’s anti-cheat mechanisms.

If Secure Boot is turned off, Vanguard will detect it as a security risk and block Valorant from launching, triggering the VAN 1067 error.

Vanguard Not Detecting Secure Boot on Windows 10?

Even if Secure Boot is enabled, there may be cases where Vanguard doesn’t detect it correctly. Here’s how to fix that:

Step-by-Step: Enable Secure Boot in BIOS

Restart your PC and enter BIOS/UEFI settings.
Navigate to the Boot or Security tab.
Find Secure Boot and set it to Enabled.
Make sure your Boot Mode is set to UEFI and not Legacy.
Save the changes and exit BIOS.

If the Secure Boot option is grayed out, you might need to:

Reset BIOS to its default settings, then enable Secure Boot again.
Convert your system from MBR to GPT if you are using an older partition style (UEFI mode requires GPT).

How to Fix VAN 1067 Error Without Reinstalling Valorant

Follow these steps to fix the VAN 1067 error without reinstalling the game:

Step 1: Verify Secure Boot and TPM 2.0 Are Enabled

Use Windows + R and type tpm.msc to check if TPM 2.0 is enabled.
Open System Information (msinfo32) to check if “Secure Boot State: On” is displayed.

Step 2: Update Windows & BIOS (Optional)

It’s important to keep both your system and BIOS up to date to avoid compatibility issues:

Open Settings → Update & Security → Check for Updates.
Visit your motherboard manufacturer’s website for any available BIOS updates.

Step 3: Run Valorant as Admin

Right-click on Valorant shortcut → Properties → Compatibility tab.
Check the box for “Run this program as administrator”.
Do the same for Riot Client.

Step 4: Reinstall Riot Vanguard Only (Without Full Game Reinstall)

Go to Control Panel → Programs → Riot Vanguard → Uninstall.
Restart your computer.
Launch Valorant again, which will trigger the automatic reinstallation of Vanguard.

This process will refresh the anti-cheat system without needing to reinstall the entire game.

Extra Fix for Persistent VAN 1067 Issues

If the above steps didn’t resolve the issue, try the following:

Reset BIOS Settings

Enter BIOS and look for an option like “Load Optimized Defaults” or “Reset to Defaults”.
After resetting, enable TPM and Secure Boot again, and save the changes.

Convert Legacy to UEFI (If Needed)

If your system is booting in Legacy BIOS mode, you may need to convert your disk from MBR (Master Boot Record) to GPT (GUID Partition Table) to support UEFI and Secure Boot. You can do this using Windows’ MBR2GPT tool:

mbr2gpt /convert /allowfullOS

Note: Be sure to back up your data before attempting disk conversion.

Conclusion: Play Valorant Without Reinstalling

The VAN 1067 error on Windows 10 is caused by missing or disabled TPM 2.0 and Secure Boot settings. By enabling both of these features in your BIOS/UEFI, you can fix the issue and play Valorant without needing to reinstall the game.

Visit Our Post Page: Blog Page