In this comprehensive post, we will tell you how to fix windows 10 startup problems, from using Windows 10 Safe Mode to performing system repairs and recovering your system to an earlier state. Let’s get started!
How to Fix Windows 10 Startup Problems
Windows 10 startup problems can be frustrating, especially when you’re faced with a blank screen, boot loop, or system freeze. Fortunately, there are several effective methods to troubleshoot and fix these issues. Whether your Windows 10 won’t boot, you’re stuck on the loading screen, or encountering a Windows 10 automatic repair loop, this guide has the solutions you need.
1. Perform a Startup Repair
If your Windows 10 won’t boot properly, the Startup Repair tool can automatically resolve many startup-related issues.
Steps to run Startup Repair:
- Power off your computer and turn it back on.
- As soon as Windows starts loading, press and hold the power button until it shuts down. Repeat this 2-3 times to trigger Windows Recovery Environment (WinRE).
- In WinRE, go to Troubleshoot > Advanced options > Startup Repair.
- Follow the on-screen instructions to complete the repair.
This solution is particularly effective for Windows 10 boot issues like failed startups or system hangs.
2. Boot into Safe Mode
Safe Mode is a diagnostic mode that allows you to boot Windows with minimal drivers and services, helping you identify whether third-party apps or drivers are causing the problem.
Steps to enter Safe Mode:
- Reboot your PC and interrupt the boot process to open WinRE.
- Go to Troubleshoot > Advanced options > Startup Settings > Restart.
- Press F4 or F5 to boot into Safe Mode.
Once in Safe Mode, you can uninstall problematic apps or drivers that may be causing Windows 10 startup problems.
3. Use System Restore
If your Windows 10 startup issues occurred after a recent update or software installation, you can revert your system to an earlier, functional state using System Restore.
Steps to use System Restore:
- In WinRE, go to Troubleshoot > Advanced options > System Restore.
- Select a restore point from before the issue occurred.
- Follow the prompts to complete the restore.
This is a reliable solution if the problem started after changes were made to your system.
4. Repair the Master Boot Record (MBR)
A corrupt Master Boot Record (MBR) can prevent Windows from starting. Repairing the MBR can resolve this issue.
Steps to repair the MBR:
Open Command Prompt in WinRE.
Run the following commands, pressing Enter after each:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcdRestart your computer.
This is particularly useful for fixing Windows 10 boot problems caused by MBR corruption.
5. Fix Windows 10 Stuck on Loading Screen
If your Windows 10 is stuck on the loading screen, it’s likely due to a conflict with system files or a failed update.
Fixes for Windows 10 stuck on the loading screen:
- Boot into Safe Mode and uninstall any recent updates or drivers.
- Run Startup Repair from WinRE.
- Use System Restore to roll back changes.
6. Fix Windows 10 Automatic Repair Loop
The automatic repair loop is a common startup problem where the system continuously tries and fails to fix itself.
How to break the automatic repair loop:
Use System Restore to revert your system.
Run the Command Prompt in WinRE and use commands to repair the MBR (as mentioned earlier).
Disable automatic repair using bcdedit commands:
bcdedit /set {default} recoveryenabled NoThis can help if Windows 10 startup repair is not working and keeps looping.
7. How to Fix Windows 10 Black Screen on Startup
A black screen on startup usually indicates issues with the display driver or external devices.
Steps to fix Windows 10 black screen:
- Disconnect all external peripherals and restart your computer.
- Boot into Safe Mode and update your display drivers.
- If necessary, use System Restore to revert changes.
8. What to Do When Windows 10 Won’t Boot After Update
Sometimes, Windows 10 won’t start properly after an update due to compatibility issues or installation errors.
Steps to fix startup problems after an update:
- Boot into Safe Mode and roll back the latest update.
- Use System Restore to undo changes.
- Run Startup Repair from WinRE.
9. Troubleshooting Slow Windows 10 Startup
If you’re facing a slow startup, unnecessary programs or corrupted system files might be the cause.
Tips to speed up Windows 10 startup:
- Disable Fast Startup in Control Panel > Power Options.
- Use Task Manager to disable startup programs.
- Run SFC /scannow in Command Prompt to check for file corruption.
10. How to Fix Windows 10 Boot Loop After Update
A boot loop after an update can prevent Windows from fully loading, causing the system to restart repeatedly.
How to fix Windows 10 boot loop:
- Enter Safe Mode and uninstall the latest update.
- Use System Restore to revert your system.
- Perform a Startup Repair to fix any underlying boot issues.
11. How to Use Windows 10 Recovery Mode to Fix Boot Issues
Windows 10 Recovery Mode is an invaluable tool for resolving startup problems. Whereas, you can access tools like Startup Repair, System Restore, and Command Prompt here.
Steps to use Windows 10 Recovery Mode:
- Interrupt the boot process to open WinRE.
- Use the appropriate option under Advanced options to diagnose and fix the startup issue.
Conclusion
Startup problems in Windows 10 can be daunting, but most issues are solvable using tools like Startup Repair, Safe Mode, System Restore, and by repairing the MBR.
However, by following this guide, you can effectively troubleshoot and fix Windows 10 startup problems and avoid issues in the future. Always remember to back up your data regularly to minimize data loss during these procedures.
If you’re still experiencing issues, it may be time to seek professional help or consider resetting your PC.
Visit Our Post Page: Blog Page
Discover more from Izoate
Subscribe to get the latest posts sent to your email.